scesv

Event summary view.

Description

scesv is the summary display of the event parameters. It shows the primary information about the current event including location, time, strength, type and processing status. Additional to the current event older events can also be chosen from the eventlist in the events tab.

The two tabs of scesv are

• Events tab showing the list of loaded events, compare Fig. Eventlist tab

• Summary tab with the details of the selected event, see Fig. Summary tab.

Events Tab

The Events tab shows the eventlist of the time span defined on the bottom side of the window. A the Events tab is also available for other GUIs, such as scolv it can be configured in the global module configuration. The description of the Events tab in scolv provides more details.

Eventlist tab

Tab1-2: Summary/Events tab, EventList: list of the last events with summarized information, List options: Show fake events, Reading 1: spinbox to limit timespan of displayed events (in days), Reading 2: spinboxes to limit timespan of displayed events (specified dates), Status: connection status

Note

As for scolv filtering of the event list and custom information can be added to the event list by configuration. Read the scolv documentation on event filtering and custom action for the details.

Summary Tab

The most recent (default) or the event selected from the event list is shown in the Summary tab, see Fig. Summary tab. Here the information are highlighted in four sections:

section	description
Time	Orign time in UTC and relative to now
Region	A map of the region and location with the event and stations
Magnitude	Different magnitude types, the values and counts
Hypocenter	Origin information with location, depth, azimuthal gap etc.

Summary tab

Tab1-2: Summary/Events tab, Origin Time: origin time in UTC and relative to now, Map: map with region and location and stations, Magnitude: different magnitude types with values and counts, Origin Info: hypocenter information with position, phase count and azimuthal gap, Event: earthquake location, Station: station with ray-path, Details: “Show Details” button to open detailed information in scolv, Event Type: event type combo box to set event type, Status: connection status

Hotkeys

Hotkey	Description
F1	Open SeisComP documentation
Shift + F1	Open scesv documentation
F2	Setup connection dialog
F6	Show propagation of P and S wave
F7	Show focal mechanism by beach ball
Shift + F7	Show focal mechanism by beach ball
F8	Toggle auto update
F9	Show raypaths and associated stations
F10	Toggle tabs
F11	Toggle fullscreen
Mouse wheel	Zoom map in/out
Double click	Center map

Module Configuration

etc/defaults/global.cfg

etc/defaults/scesv.cfg

etc/global.cfg

etc/scesv.cfg

~/.seiscomp/global.cfg

~/.seiscomp/scesv.cfg

scesv inherits global options.

loadEventDB

Default: 1

Type: double

Unit: days

Number of days to preload if scesv is started.

showLastAutomaticSolution

Default: false

Type: boolean

If enabled, the last automatic solution is displayed next to the current solution in the summary panel. If the last automatic solution differs from the current solution it is displayed in red. If both solutions match it is displayed in gray.

showOnlyMostRecentEvent

Default: true

Type: boolean

If enabled, only the most recent event is shown even if an update of an older event is being received.

recenterMap

Default: true

Type: boolean

If enabled, the map is centered around the most recent event event.

enableFixAutomaticSolutions

Default: false

Type: boolean

If enabled, an additional button is displayed which allows to switch back the latest automatic solution. This button triggers an command for scevent to prioritize automatic solutions until the next manual solution is available.

visibleMagnitudes

Default: M,MLv,mb,mB,Mw(mB)

Type: list:string

A list of magnitude types to be displayed.

button0

Type: string

Label of button0 which triggers script0.

button1

Type: string

Label of button1 which triggers script1.

ignoreOtherEvents

Default: true

Type: boolean

If the event type is either "other" or "not existing" and this flag is true then the event will not be shown.

scripts.script0

Type: string

Path to a script if button0 is clicked.

scripts.script1

Type: string

Path to a script if button1 is clicked.

scripts.script0.exportMap

Default: false

Type: boolean

If enabled, the current map is exported to file. The filename is appened to the parameter list of script0. The script has to take ownership of the file.

scripts.script0.oldStyle

Default: true

Type: boolean

If enabled, the parameter list of script0 is event ID, arrival count, magnitude, description.

If disabled, the parameter list of script0 is event ID, preferredOriginID, preferredMagnitudeID, preferredFocalMechanismID.

scripts.script1.exportMap

Default: false

Type: boolean

If enabled, the current map is exported to file. The filename is appened to the parameter list of script1. The script has to take ownership of the file.

scripts.script1.oldStyle

Default: true

Type: boolean

If enabled, the parameter list of script1 is event ID, arrivalCount, magnitude, description.

If disabled, the parameter list of script1 is event ID, preferredOriginID, preferredMagnitudeID, preferredFocalMechanismID.

summary.borders

Default: false

Type: boolean

Draw borders in the summary panel.

Note

display.* Adjust content or display custom information in the Summary tab.

display.lonmin

Default: -180

Type: double

Unit: deg

Minimum longitude of initially displayed map region.

display.lonmax

Default: 180

Type: double

Unit: deg

Maximum longitude of initially displayed map region.

display.latmin

Default: -90

Type: double

Unit: deg

Minimum latitude of initially displayed map region.

display.latmax

Default: 90

Type: double

Unit: deg

Maximum latitude of initially displayed map region.

Note

display.event.* Event information

display.event.comment.id

Type: string

ID of the event comment to be considered.

display.event.comment.default

Type: string

Value to be shown in case no valid event comment is found.

display.event.comment.label

Type: string

Label of the value to be shown.

Note

display.origin.* Origin information

Note

display.origin.comment.* Display origin comments.

display.origin.comment.id

Type: string

ID of the origin comment to be considered.

display.origin.comment.default

Type: string

Value to be shown in case no valid origin comment is found.

display.origin.comment.label

Type: string

Label of the value to be shown.

Note

poi.* Display information related to a point of interest (POI) read from the cities XML file.

poi.maxDist

Default: 20

Type: double

Unit: deg

Maximum distance in degrees of a POI to be taken into account.

poi.minPopulation

Type: double

The minimum population of a POI to be taken into account.

poi.message

Type: string

Message conversion string that converts a POI into the text displayed under the region label. There are different placeholders that can be used: @dist@, @dir@, @poi@ and @region@.

Command-Line Options

scesv [options]

Generic

-h, --help

Show help message.

-V, --version

Show version information.

--config-file arg

Use alternative configuration file. When this option is used the loading of all stages is disabled. Only the given configuration file is parsed and used. To use another name for the configuration create a symbolic link of the application or copy it. Example: scautopick -> scautopick2.

--plugins arg

Load given plugins.

--auto-shutdown arg

Enable/disable self-shutdown because a master module shutdown. This only works when messaging is enabled and the master module sends a shutdown message (enabled with --start-stop-msg for the master module).

--shutdown-master-module arg

Set the name of the master-module used for auto-shutdown. This is the application name of the module actually started. If symlinks are used, then it is the name of the symlinked application.

--shutdown-master-username arg

Set the name of the master-username of the messaging used for auto-shutdown. If "shutdown-master-module" is given as well, this parameter is ignored.

Verbosity

--verbosity arg

Verbosity level [0..4]. 0:quiet, 1:error, 2:warning, 3:info, 4:debug.

-v, --v

Increase verbosity level (may be repeated, eg. -vv).

-q, --quiet

Quiet mode: no logging output.

--component arg

Limit the logging to a certain component. This option can be given more than once.

-s, --syslog

Use syslog logging backend. The output usually goes to /var/lib/messages.

-l, --lockfile arg

Path to lock file.

--console arg

Send log output to stdout.

--debug

Execute in debug mode. Equivalent to --verbosity=4 --console=1 .

--log-file arg

Use alternative log file.

--print-component arg

For each log entry print the component right after the log level. By default the component output is enabled for file output but disabled for console output.

--trace

Execute in trace mode. Equivalent to --verbosity=4 --console=1 --print-component=1 --print-context=1 .

Messaging

-u, --user arg

Overrides configuration parameter connection.username.

-H, --host arg

Overrides configuration parameter connection.server.

-t, --timeout arg

Overrides configuration parameter connection.timeout.

-g, --primary-group arg

Overrides configuration parameter connection.primaryGroup.

-S, --subscribe-group arg

A group to subscribe to. This option can be given more than once.

--content-type arg

Overrides configuration parameter connection.contentType.

--start-stop-msg arg

Set sending of a start and a stop message.

Database

--db-driver-list

List all supported database drivers.

-d, --database arg

The database connection string, format: service://user:pwd@host/database. "service" is the name of the database driver which can be queried with "--db-driver-list".

--config-module arg

The config module to use.

--inventory-db arg

Load the inventory from the given database or file, format: [service://]location .

--db-disable

Do not use the database at all

Records

--record-driver-list

List all supported record stream drivers.

-I, --record-url arg

The recordstream source URL, format: [service://]location[#type]. "service" is the name of the recordstream driver which can be queried with "--record-driver-list". If "service" is not given, "file://" is used.

--record-file arg

Specify a file as record source.

--record-type arg

Specify a type for the records being read.

Cities

--city-xml arg

The path to the cities XML file. This overrides the default paths. Compare with the global parameter "citiesXML".

User interface

-F, --full-screen

Start the application filling the entire screen. This only works with GUI applications.

-N, --non-interactive

Use non-interactive presentation mode. This only works with GUI applications.

Options

--script0 arg

Path to the script called when configurable button0 is pressed; EventID, arrival count, magnitude and the additional location information string are passed as parameters $1, $2, $3 and $4, respectively.

--script1 arg

Path to the script called when configurable button1 is pressed; EventID, arrival count, magnitude and the additional location information string are passed as parameters $1, $2, $3 and $4, respectively.

--load-event-db arg

Number of days to load from database.